RENNtech logo NEW small v2b

RENNtech ECU+ Upgrade | W213 | E400 | 392 HP/463 LB-FT | 3.0L V6 BiTurbo | M276

ECU+ Upgrade | Up to 392 HP / 463 LB-FT | Gains: +53 HP & +78 LB-FT
SKU: ECU:54.213W.E400BT
renntech_hht_001.jpgrenntech_hht_001.jpg
Retail price without tax: $2,240.00
renntech_hht_001.jpg
ecu_tuv_m157_m278.jpg
RENNtech_M276-400_ECU+_4matic_web.jpg
renntech_hht_003.jpg
renntech_hht_002.jpg
renntech_hht_004.jpg
renntech_hht_005.jpg
Description

Online Store Button

RENNtech HHT (hand held tuner) allows you the unlimited ability to switch between tuned and stock ECU programming and requires no ECU removal!

Our proprietary tuning module stores both the RENNtech tuned file and your vehicles stock file. The module plugs directly into the OBD2 port and delivers the file you choose directly to the ECU. Programming takes only a few minutes and the vehicle can be reflashed at any time as many times as you wish.

RENNtech has been at the forefront of ECU tuning since electronic engine management started to show up in vehicles during the mid 1980s! Our experience, countless hours of in-house research, development and exhaustive testing ensure that our proprietary ECU upgrade offers incredible performance gains and rock solid daily driver reliability.

RENNtech tuning software for Mercedes offers significant gains in horsepower and torque across the vehicle's entire power band. By modifying ignition timing and throttle mapping, optimizing air-to-fuel ratios, increasing the engine's rev limiter and modifying boost mapping for turbo-charged vehicles, RENNtech performance software unleashes the true potential of your Mercedes.

 

With the proprietary RENNtech ECU Tuning the W213 - E400 gains up to +53 HP and +78 LB-FT, based on power numbers measured by RENNtech. Please note that the Mercedes M276 engine performance when measured, obtains higher numbers than rated from factory. The maximum power number reached with the RENNtech ECU Upgrade for the E400 is 392 HP and 463 LB-FT.

 

Notes:

  • We have found the M177 engine stock performance numbers vary from the baseline figures claimed by Mercedes-Benz. We typically see higher baseline numbers than claimed by the factory.
  • Power gains are calculated based on stock numbers measured by RENNtech. Crank Performance Numbers are calculated with a 17% Drivetrain loss on 4MATIC vehicles.
  • Numbers published by MBUSA are an average over a 750rpm range for HP and a 2,400rpm range for TQ. Power gains are calculated based on the peak stock performance measured by RENNtech.
  • Our numbers will be dependent on conditions and fuel quality. 93+ Octane gasoline is mandatory with this Performance Upgrade.
  • States known for poor fuel quality have to be supplied with a lower power setup. Please call for details and Race fuel options +1-561-845-7888.

 

Performance Numbers Overview 

E400 (MY2018+ | W213 | M276 | 3.0L V6 BiTurbo) Stock Performance (at crank):

  • Rated by Mercedes-Benz (avg.):                               329 HP @ 5,250-6,000rpm; 354 LB-FT @ 1,600-4,000rpm
  • Dyno measured by RENNtech (peak @crank):          339 HP @ 5,600rpm; 385 LB-FT @ 3,030rpm

E400 (MY2018+ | W213 | M276 | 3.0L V6 BiTurbo) Modified Performance (at crank):

  • Rated by RENNtech (peak @crank):              392 HP @ 5,050rpm; 463 LB-FT @ 3,550rpm
  • Rated by RENNtech (peak @wheel):              325 whp @ 5,050rpm; 384 wtq @ 3,550rpm
    • Crank Performance Numbers are calculated with a 17% Drivetrain loss on 4MATIC vehicles.

For detailed explanation on crank HP, wheel HP, drivetrain loss, etc. please click here.

 

Dyno-Graph for Performance measured at the wheels:

Newsletter

Contact us

 
7825 SW Ellipse Way, Stuart, FL 34997
 
(+1) 561 - 845 7888
 
 
Mon - Fri 9am - 6pm

 

© 2017 RENNtech, Inc. All Rights Reserved.
7825 SW Ellipse Way - Stuart, FL 34997
TEL: 561.845.7888 FAX: 561.845.6777 E-MAIL: info@renntechmercedes.com